Structured Support Framework for Landing Permit at Key West International Airport (EYW) by Just Aviation

Just Aviation provides coordinated landing permit handling at Key West International Airport (EYW), maintaining operational oversight and reviewing slot requirements concurrently to avoid conflicts Each permit file is pre-validated against slot availability and monitored through the approval cycle, reducing authority queries and delivering a predictable clearance timeline.

Operator Data Points on Landing Permit at Key West International Airport (EYW)

Key West International Airport (EYW), located two miles east of Key Wests commercial center in Monroe County, Florida, serves as a vital access point to the Florida Keys. Passenger traffic increased from 1,309,009 in 2023 to 1,449,649 in 2024, reflecting growing demand for commercial air service. The airport supports a focused general aviation presence with 59 based aircraft as of 2023. Operations are conducted through a single terminal complex with one 8-gate concourse, accommodating aircraft up to the Airbus A319 and Boeing 737-700. In 2021, the airport recorded 66,550 aircraft operations, averaging 182 movements per day across airline, air taxi, and general aviation activity. Just Aviation supports efficient and reliable operations at Key West International Airport, enhancing accessibility to this strategically important island destination.

International arrival inspections at Key West International Airport are conducted Monday through Friday between 0800 and 2000 Eastern Time. All inbound aircraft must arrive within approved service windows and comply with established permission-to-land requirements. Operations outside these hours are not supported. Commercial aircraft operators departing the United States are required to obtain outbound clearance prior to departure.

Arrival Control Areas & Inspection Environment

International arrivals are processed in a designated CBP inspection area, and aircraft are required to park within the marked CBP Box upon arrival. Air traffic control may provide positioning guidance as needed. A CBP Officer meets the aircraft directly in the inspection area to initiate the arrival process. All crew members and passengers are escorted to the Federal Inspection Services facility for formal processing, where inspection flow, passenger movement, and aircraft access are strictly controlled. Regulated international waste is collected from the aircraft during inspection in accordance with port procedures.

Permission to Land Authorization

Operators must secure permission to land prior to departure from the foreign location and no later than two hours before the anticipated arrival time. Each authorization is issued with a ±30-minute ETA tolerance. Arrivals outside this tolerance invalidate the approval and require re-coordination before landing can proceed.

Check Flight Permit services

Inspection Processing & Required Documentation

Following ramp contact by CBP, all crew members, passengers, baggage, and personal items are processed inside the inspection facility. Operators must ensure the following documentation is readily available:

Valid passports for all crew members and passengers
Applicable visas or entry authorizations
Pilot license
Current pilot medical certificate
Aircraft registration
User fee decal when required

Passengers may depart directly from the inspection facility once cleared or return to the aircraft. Any passengers returning to the aircraft must depart with the aircraft.

Inspection Processing & Required Documentation

How Just Aviation Enhances Every Step of Landing Permit Handling at Key West International Airport (EYW)?

For flights operating into Key West International Airport (EYW), Just Aviation delivers reliable landing permit handling supported by real-time operational control. Clearance requests are managed through direct coordination channels and followed closely until final approval is obtained. Operators are supported with fast, responsive handling from start to finish and prompt assistance is available at [email protected]